E1/T1 interface converter series (39 Products)

E1T1-interface-converter-series.png

There are almost no limits to your fantasy where you can expand using these series converters. Send V35, RS-232 or Ethernet or even video over E1 or multiple E1’s (inverse multiplexers). It’s sure there is a solution for your E1 conversion need’s, just browse below products. Ethernet to E1 converters, and more!

Standalone type E1 converter to Ethernet 10/100BaseT – protocol converter, Framed & Unframed

AN-E1-ETH-E E1 converter to Ethernet converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface. Can used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex. The E1 converter  is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request.…

4 x E1 to Ethernet 100BaseFX (fiber port) converter

AN-4E1-ETH-FIB converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface, which in this case is fiber type. he E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request. A pair of AN-4E1-ETH-FIB offer a cost effective solution for using existing E1 leased lines for transparent Ethernet service, and…

E1 G.703 to Ethernet & RS-232 converter

Model AN-FE1-RS232-ETH  is a single port framed E1 with  RS232 channel and Ethernet Bridging that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the FE1-ETH converter provides FE1 access at connection data rates of 2.048 Mbps, or  nx64 (n=1 to 32 channels). The FE1-ETH +RS232 converter is an excellent choice for internet…

1 – 8 E&M signaling type ports to E1 G.703/G.704 converter multiplexer

E&M (earth & magneto, or ear & mouth) to E1 G.703 converter provides conversion between ITU-T G.703 standard E1 framed interface and 1 to 8 E&M ports. The E&M standards were initially developed by Bell Labs and extended by national PTT administrations. The standard defines two sides to the interface: Trunk Circuit - this is normally the PABX Signaling Unit - this used to refer to…

16 E1 central office convergence converter

No more huge central chassis are needed! AN-16E1-4ETH-C is the AD-NET multi-E1 convergence-type bridge equipment, it provides 16 E1 and 4 FE interfaces, possesses Channel convergence function, according to the different bandwidth can divide into 1~16 Channel. Each Channel is composed of one or multi-E1 lines, the Channel as the link unit carries the Ethernet data transparently, and it has…

Framed/Unframed E1 G.703/704 protocol converter to V.24

AN-FE1-V.24 framing structure interface converter adopting ASIC (application specific integrated circuit) design. It is capable of converting N*64K continuous data flow into PCM signal of E1, with a rate up to 128Kbps. Mode of V.24 interface of this converter is DCE, it connects DTE device through direct cable, and connects DCE device through cross cable.

Framed E1 to 10Base2 (coax BNC Ethernet port) interface converter

AN-FE1-ETH2 Framed E1 G.703/G704 to 10BASE-2 Interface Converter (E1 - Ethernet Bridge) is an interface converter of high performance, which accomplishes the converting between the 10MBit/s Ethernet port and the E1 port. As an extended device of the Ethernet, the FE1/10BASE-2 bridge realizes interconnection of two Ethernet by using the E1 channel provided by existing networks with low cost. 10BASE-2(BNC)…

E1 to T1 & T1 to E1 protocol / interface converter

AN-E1-T1 is easy to use plug-and-play E1 to T1 converter. It will start work immediatelly after you plug in E1 and T1 cables. It can be used in various applications, where simple conversion between E1 G.703 (30 time slots) and T1 (24 time slots) are needed. Unit can be used in 3 different applications: 1) E1 over T1 leased lines.…

Video / Audio over E1 multiplexer

AN-DV-E1 series E1 video coder & decoder, mainly used in long-distance video monitoring, have function of E1 single directional transmitting video signal. It is ensured that any device with E1 interface, such as PBX, Mobile base station, SS7 signaling device and voice post system, can seamlessly connect to E1 video coder & decoder. Also, E1 video coder & decoder can…

E1/ V35+ ETH Protocol Converter

AN-FE1-V35-ETH uses E1 slot multiplexing technology to choose random slot from standard E1 channel for different interface, realizes data conversion from E1 interface to V35 and ETH interface and compose V35 channel of n x 64K (n=1-32). It is suitable for the case that part slot of E1 channel can be used. The interface mode of V35 data is DCE, which…

FE1-V35+RS232 converter

AN-FE1-V35-232 converter provides conversion from ITU-T G.703 framing E1 interface to V35 interface,and provide 1 RS232 data channel, provide safe and seamless connection between different device with different interface,option slot choice to compose N*64k(N=1-32) V35 channel. suitable for the case of available part slot of E1 channel and the device to transfer having only V.35 output. interface is DCE, can…

E1 – ETH+4 FX0/FXS voice bridge

This multiplexer provide conversion from ITU-T G.703 framing E1 interface to Ethernet interface,and transmit 1 to 4 voice signals through E1 channel, realize extend phone line through E1 channel.E1 signal can transmit using device like fiber terminal, 2 LAN become 2 segments in a LAN. Provides data and voice connect simultaneity through single E1 channel.

E1 G.703 to V.24 interface converter

AN-E1-V24 E1/ V.24 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.24 interface, it can receive synchronous 2.048 Mbps data from E1channal and transmit the data to router, DDN, multiplexer or other equipment, thus providing secure and seamless communicating connection between equipments with different interfaces in the network. It is widely applied in the interface…

E1 G.703/704 to 4 / 8 x RS-485 converter

AN-E1-4(8)RS485 is E1 G.703 to RS485 converter that realizes data conversion between ITU-T G.703 standard E1 G.703 and 4 or 8 RS485 interface. Date interface mode is DCE, could connect to DTE or DCE device, RS485 can transmit asynchronous 0~115200Kbps self-adapting speed.

Framed n x 64 K Fractional E1 – RS-485 converter

AN-FE1-RS485 is E1 G.703/G.703 framed / fractional n x 64 K to RS485 converter that realizes data conversion between ITU-T G.703 standard E1 G.703 and 1 x RS485 interface. Date interface mode is DCE, could connect to DTE or DCE device, RS485 can transmit asynchronous 0~115200Kbps self-adapting speed.

E1 – RS-485 converter

AN-E1-RS485 is E1 G.703 to RS485 converter that realizes data conversion between ITU-T G.703 standard E1 G.703 and 1 x RS485 interface. Date interface mode is DCE, could connect to DTE or DCE device, RS485 can transmit asynchronous 0~115200Kbps self-adapting speed.

E1 – 4/8xRS232 converter

Transmit 8 RS232 signal through E1,used in transmitting signal of mobile BS or electric, signal of multi-user card or bank terminal.

E1 – RS-232 converter

AN-E1-RS-232 provides realiable protocol conversion from E1 G.703 to serial RS-232 interface. Provides by 2 loop function: E1 local loop, AN-E1-RS232 can be used as easy and robust unit for management networks, low speed adapt access, POS and other areas.

2 E1 Add/Drop type to 10/100 BaseT Ethernet converter

AN-FE1/FE1+ETH Interface Converter is an economical digital access solution to framed E1 and partial E1 network service. The device can drop several continuous timeslots from the up standard ITU-T G.703 E1 interface as Ethernet service, and the remainder is straight-through from up E1 to down E1. The device can be cascade connected to the same devices or the other related…

E1 time slot mux / 30 FXS/FXO over E1 converter

AN-E1-MUXlite provides conversion between ITU-T G.703 standard E1 framed interface and up to 30 FXS/FXO standard POTS analogue telephone lines. AN-E1-MUXlite is the fundamental equipment for the digital communication system and it has another name, i.e. PCM basic group equipment. The equipment is used to converge the signals such as voice, data and image into a standard 2M interface via…

8 x E1 Ethernet 100BaseFx (fiber port) converter

AN-8E1-ETH-FIB E1 Ethernet converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface, which in this case is fiber type. he E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request. A pair of AN-8E1-ETH-FIB offer a cost effective solution for using existing E1 leased lines for transparent Ethernet…

E1 to Ethernet 100BaseFX (fiber port) converter

AN-E1-ETH-FIB converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface, which in this case is fiber type. he E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request. A pair of AN-E1-ETH-FIB offer a cost effective solution for using existing E1 leased lines for transparent Ethernet service, and…

E1 – 4xV.35 converter

This converter provide conversion from ITU-T G.703 framing E1 interface to 4 x V35 interface provide safe and seamless connection between different device with different interface,option slot choice to compose N*64k(N=1-32) V35 channel. Suitable for the case of available part slot of E1 channel and the device to transfer having only V.35 output. interface is DCE, can connect with DTE or…

E1 – 2xV.35 converter

E1-V35 provides physical conversion between ITU-T G.703 standard E1 interface and 2 standard V.35 interfaces. It can provide safe and seamless communication connection between equipments with different interfaces in the network. Random time slot can be chosen in G.703 standard E1 to compose V.35 channel with the rate of N*64K(N=1-32). It is suitable for the case that part slot of…

Framed E1 – V.35 converter

AN-FE1-V.35 converter provides conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 channel of SDH, PDH, and other Optical Transmission Equipment or microwave, satellite Equipment to V.35/V.24 channel, Extend V.35 channel of DDN. Used widely in data communication networks, Connecting with V.35/V.24 interface of Routers and Optical Transmission Equipments without G.703 interface, realize match between…

E1 – V.35 converter

Provides safe and seamless connection between different devices with different interfaces. Used widely in connecting WAN and LAN, video monitor. data interface is DCE, connnect with DTE or DCE. The main E1 link may be clocked from the recovered receive clock (LBT), from the data port, or from an internal oscillator. The G.703 port provides for either 75 Ohm unbalanced…

16 x E1 – 4 x Ethernet 10/100 BaseT converter

Super converter - 16 x E1 - Ethernet 10/100 converter / inverese multiplexer, to get up to 32 Mbit/s speed from binding up to 16 E1 channels The AN-16E1-4ETH-G  inverse multiplexers transmit up to 32 Mbps channel over multiple E1 links. They bridge the gap between E1 and E3, allowing bridges and routers to operate at their fastest rates. The AN-16E1-4ETH-G …

8 x E1 to 4 x 10/100BaseT protocol converter / inverse multiplexer with RS-232 monitoring port

AN-8E1-4ETH 8E1&10/100Base- TX Bridge is a device that takes ASIC chip as its core and enables 8 channel Ethernet data to be transmitted through multi 8E1 channels. The 8E1&10/100Base- TX Bridge breaks through the bandwidth limit of single E1 Ethernet Bridge. It is very easy to make use of the existing rich E1 resources in the public networks to quickly…

8 E1 – 4 x 10/100 Ethernet converter with VLAN dot1Q support and professional GUI NMS

8 E1 - 4 x 10/100 Ethernet converter with GFP-F, VC (Virtual Concatenation), LCAS support and professional GUI NMS. It's a most latest product in n x E1 to Ethernet converter range in AD-net product line. Besides the basic idea of bundling 8E1 to get 8 Mbit/s via professional GUI NMS access to wide array of user friendly features are possible…

8 x E1 – Ethernet 10/100 BaseT converter

The AN-8E1-ETH inverse multiplexers transmit up to 16 Mbps channel over multiple E1 links. They bridge the gap between E1 and E3, allowing bridges and routers to operate at their fastest rates. The AN-8E1-ETH have a built-in 10/100 Ethernet bridge with VLAN support for LAN-to-LAN applications over 8 E1 links. The AN-8E1-ETH fully meets all of the E1 specifications including…

4 x E1 – Ethernet 10/100 BaseT converter

The AN-4E1-ETH  inverse multiplexers transmit up 8 Mbps channel over multiple E1 links. They bridge the gap between E1 and E3, allowing bridges and routers to operate at their fastest rates. The AN-4E1-ETH  have a built-in 10/100 Ethernet bridge with VLAN support for LAN-to-LAN applications over 4 E1  links. The AN-4E1-ETH  fully meets all of the E1 specifications including G.703,…

4 x E1 to 4 x 10/100 Ethernet protocol converter with RS-232 monitoring port

AN-4E1-4ETH Interface Converter is a device that takes ASIC chip as its core and enables Ethernet data to be transmitted through multi 4E1 channels. AN-4E1-4ETH Interface Converter breaks through the bandwidth limit of single E1 Ethernet bridge. It is very easy to make use of the existing rich E1 resources in the public networks to quickly extend the range of…

4 E1 – 4 x 10/100 Ethernet converter with VLAN dot1Q support and professional GUI NMS

4 E1 - 4 x 10/100 Ethernet converter with GFP-F, VC (Virtual Concatenation), LCAS support and professional GUI NMS. It's a most latest product in n x E1 to Ethernet converter range in AD-net product line. Besides the basic idea of bundling 4E1 to get 8 Mbit/s via professional GUI NMS access to wide array of user friendly features are…

Framed E1 – 4 x Ethernet 10/100 BaseT converter

AN-FE1-4ETH converter provides easy  conversion from ITU-T G.703 E1 channel to 4 Ethernet interfaces. Can be used widely in connecting between WAN and LAN, monitoring, etc. The 4 x Ethernet interfaces is 10/100Mbps auto negotiation and can be full/half duplex.  AN-FE1-4ETH can be used in applications where several Ethernet ports are necessary and additional switch or hub installation is not…

E1 – 4 x Ethernet 10/100 BaseT converter

AN-E1-4ETH converter provides easy and cost effective conversion from ITU-T G.703 E1 channel to 4 x Ethernet interfaces. The 4 x Ethernet interfaces is 10/100Mbps auto negotiation and can be full/half duplex. AN-E1-4ETH can be used in applications where several Ethernet ports are necessary and additional switch or hub installion is not possible. The E1 is transparent and in full rate, which…

Framed E1 to 4 Ethernet converter with Local Network Managment System

AN-FE1-4ETH Interface Converter (also as AN-FE1-4ETH Bridge) is an Ethernet bridge of high performance, which accomplishes the converting between the 100M Ethernet port and the E1 port. As an extended device of the Ethernet, the AN-FE1-4ETH bridge realizes interconnection of four Ethernet by using the E1 channel provided by existing networks with low cost. 100BASE-TX (RJ45) interfaces are provided at…

E1 to 2 x 10/100 Ethernet port converter with port isolation feature

As an extended device of the Ethernet, the AN-E1-2ETH E1 to 2 x Ethernet over E1 converter realizes interconnection of two Ethernet by using the E1 channel provided by existing networks with low cost. 100BASE-TX (RJ45) interfaces are provided at the end of Ethernet LAN to accomplish various functions including double Ethernet interface broad band shared,  MAC address self-learning, address filtering, address table…

Framed E1 to Ethernet 10/100BaseT protocol converter

AN-FE1-ETH Ethernet to E1 Interface Converter (also as AN-FE1-ETH Ethernet Bridge) is an Ethernet bridge of high performance, which accomplishes the converting between the 100M Ethernet port and the E1 port. As an extended device of the Ethernet, the AN-FE1-ETH Bridge realizes interconnection of two Ethernet by using the E1 channel provided by existing networks with low cost. 100BASE-TX (RJ45)…

E1 converter to Ethernet 10/100BaseT – protocol converter

AN-E1-ETH E1 converter to Ethernet converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface. Can used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex. The E1 converter  is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request.…

Stay in touch via e-mail newsletter!

Subscribe to our mailing list for weekly performance tips