Click Fraud

1.        Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.

2.        Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port

3.        User-friendly Web server supported for easy setup and maintenance

4.        Support SNMP V1/V2 network management

5.        STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.

6.        Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based8021.1P basedMAC based and TOS based).

7.        Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning

8.        Ethernet packet size up to 9720byte

9.        Point to point and point to multipoint supported

10.    Local Ethernet port throughput limiting

11.    Software and hardware online upgrade

12.    Power supply redundancy

Item

Description

Model

AN-TDM-IP-STM-1

2 PWR slots

1 STM-1 slot

1 Ethernet uplink slot

1 External clock interface

Service card

Ethernet uplink card

5 GE electrical ports and 1 GE optical port

Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x

Speed and duplex auto-negotiation or manual

STM-1 card

2 port

Default SC/PC

Power

Supply

2 power slots

AC 220v power module

AC 110v power module

DC -48v power module

Consumption

≤40W

Working Environment

Temperature

0~ 50°C

Relative Humidity

≤90% (non-condensing)

Dimension

W x H x D (mm):

1U: 440 x 44 x 231 (mm)

Application scenarios:

stm1 over ip
stm1 over ip

 

stm1 over ethernet
stm1 over ethernet
AN-TDM-IP-STM-1

STM-1 over IP (Ethernet) Multiplexer (SDH over IP), Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, STM-1 card has 2 port, support local clock, STM-1 line clock and external clock

Description

STM1 over IP converter is a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.

State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.

AN-TDM-IP-STM-1 has 2 power slots, 1 STM-1 slot,1 GE uplink slot and 1 External clock interface slot.

STM1 over IP converter AN-TDM-IP-STM-1 can aggregate 63 E1 over IP remote services to 1 STM-1 port. Remote CPEs could be other members in TDM Over IP family such as AN-TDM-IP-16E1, AN-TDM-IP-8E1, AN-TDM-IP-4E1, AN-TDM-IP-E1, AN-TDM-IP-2E1 etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure.

Stay in touch via e-mail newsletter!

Subscribe to our mailing list for weekly performance tips