AN-UM100 series media converter complies with IEEE802.3 standards, It is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network.

The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly.

This converter model can be used as slide-in module to the 19 converter rack.

Converter is transparent to all protocols, can be used all all areas as Fiber to The Home, Fiber to the Business or Fiber to The Curb.

Mix up at same AN-CH05 chassis any type of converters to create a access pool at the center. AN-UM100 series converters are purely dual fiber converters. 1310 nm or 1550 nm technology can be used, or at specific cases we can offer also more exotic wavelenghts as 1610 nm, 1490 nm or any other.

• 10/100Mbps and full/half duplex automatically configure in TP port.
• Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX Standards
• MDI/MDI-X Auto Negotiation
• LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.
• Supports LLR (Link Loss Return) for FX Port
• Supports LFP (Link Failure Pass) function
• Optional 19” System Chassis (AN-CH05) holds up to 14 Media Converters
• Hot Pluggable & Wall-Mountable
• FCC Class A & CE approved 
• RoHs compliance
   

Wavelength
Multi-mode: 1310nm; Single-mode: 1310nm

Fiber cable(m):
8.3/125, 8.7/125, 9/125 or 10/125 single-mode

Maximum distance: Multimode;2km(Default), Single-mode;20km/(Default)40km/60km/80km/100km/120km
Power supply: 100 to 240VAC 50 to 60Hz
Input power: 2A +5V
Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)

Environment
Relative humidity: 5% to 90%
Operating temperature: 0 to 60
Storage temperature: -20 to 70

Application:



Quick Setup Tutorial Video: