Click Fraud
May
17
2017
Extinction Ratio in Optical Transmission Systems
  Optical systems usually use two levels of optical power. A binary ‘1’ is signified by the higher power level and a binary ‘0’ by the lower power level. When these power levels are sy
Read More
May
16
2017
8 Important Design Considerations for Optical Transmitters
The term optical transmitters refer to the source of light in an optical system.     It is fairly obvious that the light sources are an integral and a crucial component of a fiber
Read More
May
15
2017
16 Types of Fiber Optic Connectors to Choose From
Remateable connections are made possible by Fiber Connectors.  Fiber Connectors are therefore generally used where flexibility is needed at termination points when an optical signal is routed. &n
Read More
May
12
2017
Difference between Laser’s and LED’s in Optical Transmission. DFB and FP laser diodes.
LASERs (also known as laser diodes or LD) and LEDs (light emitting diode) have different characteristics in the way in which they emit light. While a LASER emits converged light, the output of an LED
Read More
Apr
20
2017
Optical Fiber Fusion Splicing vs Mechanical Splicing
Optical fibers are among the top choices for usage in today’s metros together with remote networking systems. As we have mentioned earlier, the
Read More

Testimonials

Lomoveishiy – Finland

I needed those to connect my PC on the third floor to have internet access in that room, and ISP installed their modem on the first floor only. After dropping fiber patch cables, plugged in all cables into these media converters at both sides, and link came up instantly. Was much easier than I thought!

Raymond – USA

Great experience – units worked straight out of the box – just needed plug in cables and we were done. I also like the possibility to enable jumbo frames, while we do not have a need for this feature at the current moment it’s great to have this option.