16 E1 G.703 + 5 x 10/100/1000 GE over fiber multiplexer with smart GUI and dot1Q, QoS and shaping
AN-FM-480-4GETH-G realizes up to 16 E1s and 4*10/100/1000M Ethernet + 1 *10/100/1000M optical Ethernet mixed multiplexing to optical fiber
The AN-FM-480-GETH-G is designed as point to point optical transmission system based on Application Specific Integrated Circuit (ASIC). It integrates the traditional PDH multiplexer and 1000Mbps Ethernet optical transceiver, and can realize the 16 E1s and 1000Mbps wire-speed Ethernet transmission over fiber.
It not only provides dual hot-pluggable optical interfaces to realize 1+1 optical protection, but also integrates one RS232 auxiliary channel and one Engineering Order Wire (EOW) channel. Furthermore, it owns many humanize functions, such as Automatic Laser Shutdown (ALS), Remote Power down Detect (RPD) and so on.
It supports the management based on GUI NMS. With the supper terminal integrated by PC, user can realize the monitor and configuration of the device.
With low power consumption, high integration and well stability, it is a cost-competitive solution for the application where gigabit Ethernet and E1 are required simultaneously, such as the telecommunication, the electric power and the finance fields.
Realizes up to 16 E1s and 4*10/100/1000M Ethernet + 1 *10/100/1000M optical (SFP type) Ethernet mixed multiplexing to optical fiber
Provides dual optical interfaces
SFP MSA (INF-8074i), ITU-T G.695, FC-PI V2.0 standards compliable, therefore hot pluggable is supported
Support 1+1 protection and Automatic Protect Switch (APS) with the switching time less than 50ms
The line bit rate is 1.25Gb/s
The transmission distance is optional (dependent on the SFP optical module)
Provides optical loop-back function, a great convenience for trouble shooting
ALS function supportable Supports Remote Power down Detect (RPD) function, which can be used to distinguish the failures of remote power down or fiber broken
Provides up to 16 E1 interfaces, compliant to ITU-T G.703, and balanced/unbalanced selectable
Jitter tolerance, jitter transfer characteristic and jitter generation fully comply with ITU-T G.823 and G.742 recommendations
Local/remote loop-back function supported
Provides an Ethernet channel with up to 1000Mb/s bandwidth
16E1 G.703 + 4 10/100/1000 UTP Gigabit Ethernet + 1 SFP type port over fiber smart GUI managed multiplexer, AC/DC power options, RJ-45 or BNC for E1's, RS-232 auxilary channel on board, enginering orderwire port.