AN-E1-ETH converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface. Can used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex. The E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request. A pair of AN-E1-ETH offer a cost effective solution for using existing E1 leased lines for transparent Ethernet service. Local management of the AN-E1-ETH Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link, Ethernet LAN and serial ports for status and Loss of Sync. AN-E1-ETH compact G.703 Access Converter provides E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package. AN-E1-ETH terminates the G.703 Telco interface and converts the data for transmission to a user-oriented 10BaseT interface.

• Based on self -Copyright IC.
• Semi/full duplex self adapt, support VLAN.
• RJ45 interface support auto-mdix.
• Provide 2 clock types: E1 master clock, E1 line clock.
• provide 3 loop functions: local loop, to remote loop, order remote loop.
• Have pseudo random code test function, easy the installation and maintenance.
• Support 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
• Have Ethernet monitor self-reset function, equipment will not dead.
• Provide detecting realtime Ethernet communication status.

E1 interface parameter:

• Channel capacity: 1 Channels
• interface rate: ungframing/framing: N*64Kbps，N=0~31;
• Bit Rate: 2.048 Mb/s ±50 ppm
• Line Code: HDB3
• Line Impedance: 120 Ohm / 75 Ohm
• Connector: RJ-45 or BNC
• Pulse Shape: ITU-T G.703.
• Jitter Performance: ITU-T G.823
• clock: inter-clock, line-clock
• Output jitter<0.05UI

Ethernet interface:

• Interface Rate: 10/100Mbps
• Duplex: half and full duplex self-adapt.
• Interface character: match IEEE802.3, IEEE802.1 Q(VLAN)
• Connector: RJ45, support auto-mdix
• MAC address capability: 4096

Power:

• DC: -48V (-36 to -72V); +24 V (Optional)
• AC: 90 to 260 VAC ; 47 ~ 63Hz
• Power Interface: DC power terminal/AC socket
• Power Consumption: 8 W maximum

Working environment:

• Operating temperature: 0 to 50 °C
• Storage temperature: -20; to +70 °C
• Relative humidity: 5% to 90% (25 °C no condense)

Dimensions
140mm (depth) x 210mm (width) x 40mm

Video: How to setup and test AN-E1-ETH converter in less than 30 SECONDS!