The AN-UMG series comply with IEEE 802.3/ab Gigabit Ethernet standard. It isupports two types of media for network connection such as 1000 Base-T to 1000 Base SX/LX and connects these two types of segments to operate smoothly

Converter fits in AD-net media converter chassis as plug in module and can be used in standalone applications as well

AN-UMG series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Fiber Gigabit) media and vice versa. The 1000Base-T port supports full-duplex Gigabit connection at wire speed with RJ45 connector. The fiber Gigabit connection supports shortwave (SX) or longwave (LX) laser optic with multi-mode or single-mode SC type connector.

This converter will give your Copper Gigabit connection the ability to interface with fiber connection over a distance up to 80 km!

AN-UMG dual fiber optical fibre converter is manufactured to provide 1000Base speeds according to your existing 1000Base-TX network. This is also known as a Gigabit network. The converter takes a typical shielded RJ45 connector into a Fiber Optic SC connection to run the distance. You can then use another converter to return the signal into RJ45 to match with the network you are using.

• Compliant with IEEE 1000Base-T and 1000Base-LX
  
• One 1000Base-T RJ-45 port
  
• One 1000Base-LX/SX Port w/ SC/ST-Type Connector
  
• Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
  
• Wall-Mountable
  
• Optional 19” system chassis with redundant power supply (AN-CH05), holds up to 14 AN-UMG series Media Converters
• CE, FCC & RoHs compliant
  

   

Standarts: IEEE802.3z/ab 1000Base-T 1000Base-SX/LX

LED Indicators: FX LINK, FX FDX, TP LINK, TP FDX, ACT, POWER

Data rate: 2000Mbps full duplex

TP: 1000 FDX with NWAY auto-negotiation

Power supply: 100 to 240VAC 50 to 60Hz

Input power: 2A +5V

Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)

Environment: Relative humidity; 5% to 90%

Operating temperature: 0 to 60

Storage temperature: -20 to 70

Application scenario:

   

Quick Setup Tutorial Video: