Balun 75 120 ohm converter, Impedance converter, single port & 19' rack mount balun panels


	Impedance converters (baluns)

		single port converter AN-IC is a 1 port 75 Ohm to 120 Ohm impedance convertor (balun) for G.703 signal lines (balun 75 120 ohm) see specifications

		Cable type single port 75 120 ohm converter AN-IC-C1 is single port balun G.703 E1 interface cable type impedance converter (75Ω dual coax and 120Ω twist pair). It is used conveniently without power supply. Two coaxial cable are assemblied with converter, which make customer use easily. see specifications

		16 ports 75/120 ohm balun converter panel AN-IC16 G.703 Balun Panel (75-Ohm to 120-Ohm) for modular 19' rack mount's offer 16 ports of RJ45 - BNC conversion see specifications

		24 ports 75 to 120 ohm RJ-45 BNC impedance conversion balun panel AN-IC24 G.703 24 port Balun Panel (75-Ohm to 120-Ohm) for modular 19' rack mount's - offers 24 ports - maximum use of your space in crowded 19' racks see specifications

		Front Mount Coax(75ohm) to RJ45(120ohm) 16 port balun panel with DB68 connector AN-IC16-DB68 G.703 Balun Panel (75-Ohm to 120-Ohm) for modular 19' rack mount's offer 16 ports of RJ45 - BNC conversion with DB68 option at back side of panel see specifications

		16 ports converter with L9 (DIN1.6/5.6) connectors AN-IC16-L9 G.703 Balun 75 120 Panel (75-Ohm L9 (DIN1.6/5.6) to 120-Ohm RJ-45) for modular 19' rack mount's see specifications

		Metal casing single port balun AN-IC-M is a 1 port 75 Ohm to 120 Ohm impedance convertor (G703 balun), metallic casing and BNC/RJ-45 connectors located at opposite sides see specifications

100 ohm - 150 ohm Ethernet Impedance Balun / Converter

AN-EIC Impedance Matching Device converters Type 1 (Token-Ring cable) 10Base-T(UTP)/100Base-TX(STP) cabling on jack in position at pin 1,2,3,6. Matches Impedance from 150 ohm to 100 ohm, conforms to IEEE 802.3 10Base-T/IEEE802.3u 10Base-TX Application.

see specifications