| |  | AN-miniSDH | |
 |  | | AN-miniSDH is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform | | Request price | | Support | | |  | As a key member of AD-net SDH/MSPP Product family, AN-miniSDH is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.
AN-miniSDH is a modularized unit with 4 universal slots, supporting different interface cards, such as STM-1 fiber optic cards, E1 cards, Ethernet cards (EoS VCAT), and V.35 card. The main board cross-connect capacity is 504—504 VC-12s (8—8 VC-4s), allowing non-blocking adding/dropping services among different interfaces. It supports the hybrid transmission of SDH, PDH, Ethernet and N—64K V.35 services within the same equipment. With the large capacity cross-connect matrix, the AN-miniSDH can be configured as ADM, TM, and REG. It is suitable for multiple network topologies such as point-to-point, chain, ring, hub, and mesh networks |  | - 4 General Slots, supporting a range of interface cards, including SDH, PDH, Ethernet, and V.35 cards.
- Ethernet service supporting GFP encapsulation, VC12 virtual concatenation (1~63 VC12)
- Large cross-connect matrix capacity is 504—504 VC-12s (8—8 VC-4s) and powerful networking ability
- LCD display for system configuration and alarm
- Inter-working with popular SDH/MSPP products of various vendors
- Suitable for 3G access network transmission
- Easy commissioning and maintenance
- High integration, compact design
- High reliability, low CAPEX and OPEX
|  | Index | Performance Parameter | SDH Interface | Max | 8 STM-1 optical interfaces - Four AN-M-SDH-2-STM1- cards used | Connector | SC/PC | Spec. | S-1.1, L-1.1, L-1.2 | Single fiber bi-directional interface can be optionally supported | Service Card (4 General Slots) | AN-M-SDH-1-STM1 | Single STM-1 optical interface card | AN-M-SDH-2-STM1 | Dual STM-1 optical interfaces card | AN-M-SDH-4E1-75 | 4—E1 interface card (75W) | AN-M-SDH-8E1-120 | 8—E1 interface card (75W or 120W) | AN-M-SDH-2ETH | 2—FE interface card (2 FEs over a single virtual concatenation channel) | AN-M-SDH-4ETH | 4—FE interface card (4 FE interface over 4 independent virtual concatenation channels) NOW AVAILABLE WITH FX fiber interface! | AN-M-SDH-2V35 | 2—V.35 framed interface card (Nx64k) | PDH interface | E1 Spec. | Comply with G.703, 2.048Mbps, HDB3 | Max E1 | 24E1 (three 8XE1 cards support) | Ethernet | Interface | 10/100Base-Tx, Comply with IEEE 802.3 | Max FE Interface | 12 FE (three 4xFE cards support) | Encapsulation | Comply with ITU-T G.7041 (GFP) | V.35 | Max Interface | 6 V.35 interfaces (n—64K) DCE/DTE | Cross-connect Capacity | Low order VC12 | 504—504 VC12 | Management | Protocol | SNMP or Q3 | Interface | 10Base-T and RS232 RS485 | EOW interface | Standard socket RJ11 | LCD Display | Supported | Physical Dimension | 1U: 440 — 44 —230 (mm) | Power | Supply | -48V DC or 220V AC or dual power supply +24VDC | Consumption | Consumption 15 W | Environment | Temperature | 5°C - 45°C | Humidity | <90 % | Weight | <3.5 kg |
Front panel functional drawing scheme are below:
Application scenario:
Application Scenario Nr.1 SDH core network integration with FtFH/FTTB Ethernet networks.
Application Scenario Nr.2: SDTH core, and access networks with varios AD-net SDH multiplexers involved |  | AN-M-SDH-CH | Multi-service SDH access equipment, core chassis with 4 physical slots for modules. AC/DC power supply | AN-M-SDH-STM1v1 | Single STM-1 optical interface card with 1-port STM-1 optical interface, connector: SC | AN-M-SDH-STM1v2 | Single STM-1 optical interface card, 1-port STM-1 optical interface ,Single 1310nm, connector：SC | AN-M-SDH-STM1-WDM | Single STM-1 optical interface card, 1-port STM-1 optical interface ,Single mode WDM (BIDI) 1310nm, connector：SC | AN-M-SDH-STM1v3 | Single STM-1 optical interface card, 1-port STM-1 optical interface , 1310nm, high-power, transport distance < 70km | AN-M-SDH-STM1v4 | Single STM-1 optical interface card, 1-port STM-1 optical interface , 1550nm, high-power, DFB, transport distance < 120km | AN-M-SDH-2-STM1v1 | Double STM-1 optical interfaces card, 2-port STM-1 optical interface，connector: SC | AN-M-SDH-2-STM1v2 | Double STM-1 optical interfaces card, 2-port STM-1 optical interface and 1-port is high-power，transport distance < 70km | AN-M-SDH-2-STM1v3 | Double STM-1 optical interfaces card, 2-port STM-1 optical interface and 1-port is high-power，transport distance < 120km | AN-M-SDH-2-STM1v4 | Double STM-1 optical interfaces card, 2-port STM-1 optical interface，high-power, transport distance < 70km | AN-M-SDH-2-STM1v5 | Double STM-1 optical interfaces card, 2-port STM-1 optical interface，high-power, transport distance <120km | AN-M-SDH-2-STM1v6 | Double STM-1 optical interfaces card, 2-port STM-1 optical interface and 1-port is high-power and 1-port is DFB high-power | AN-M-SDH-2-STM1v7 | Double STM-1 optical interface card, 1-port STM-1 optical interface ,Single mode WDM (BIDI) 1310nm, connector：SC | AN-M-SDH-2-STM1v8 | Double STM-1 optical interface card, 1-port STM-1 optical interface ,Single mode WDM (BIDI) 1550nm, connector：SC | AN-M-SDH-2-STM1v9 | 2-port STM-1optical interface, single fiber, 1310nm for east, 1550nm for west | AN-M-SDH-4E1-75 | 4-port E1, 75 ohm tributary card | AN-M-SDH-4E1-120 | 4-port E1, 120 ohm tributary card | AN-M-SDH-8E1-75 | 8-port E1, 75 ohm tributary card | AN-M-SDH-8E1-120 | 8-port E1, 120 ohm tributary card | AN-M-SDH-2V35 | 2-port framed V35 serial interface tributary card | AN-M-SDH-2ETH | 2-port Ethernet，sharing the transport channel, transmit VC12 | AN-M-SDH-4ETH | 4-port Ethernet，separate VC mapping on each of the ports, transmit VC12 | C-75-OHM | 75 ohm cable |
|  | MicroSDH Systems (1 E1 / 1 V35)
MetroSDH systems (<252 E1, V35, ETH) |  | | What is SDH and what is the difference between SDH and PDH? |  | | Latvia, Riga: AN-SDH63 helps to deliver 63 E1 over 1 fiber only and saves space in 19' rack | | |  | | | | | | | |
